EMCON product and service guide

Kerb stone types and sizes in the UAE

EMCON’s kerbstone range includes bullnose or half-battered, flush, pin, heel, tire-friendly, transition, spill and rollover profiles. Review the existing size table below and send the exact profile, dimensions, colour, finish and quantity with your enquiry.

How to read the size table

How EMCON states kerbstone dimensionsAn axonometric view of a precast kerb unit. Length is measured along the kerb line, width across the kerb from the channel face to the back, and height vertically over the full unit rather than the exposed face.LENGTHalong the kerb lineHEIGHTWIDTHchannel to back
Every size in the table below is stated as length × width × height in millimetres. Length runs along the kerb line, width across the kerb from the channel face to the back, and height is the full unit height — not the exposed face, which depends on how deep the kerb is bedded.

Profile sections

The first group in the table below covers three profiles that share one size set. Transition, spill and rollover units are made to the project detail and are listed separately.

150305
BullnoseR = 19.05 to the top arris
150305
Half-batteredbatter over the top 100, top 30 narrower
150305
Flushsquare section, no worked arris
50150
Pin kerb50 wide, for landscape edges
75150
Heel kerblow backing restraint
390400
Trief180 upstand, 210 foot 120 high, R = 25

Shared sizes with the wheel stopper range

The 915 × 100 × 150, 915 × 150 × 150 and 915 × 150 × 200 units are the same product as the concrete wheel stoppers of those dimensions, sold into both uses. Order them together where a car park needs both perimeter edge restraint and bay demarcation.

Paving-block factory-assessment documentation is published by Dubai Municipality; request current product-specific documents for approval.

Request a project quoteCall +971 4 347 3400


Kerb Stones

Kerbstone Length Width Height Weight/Piece (Kg) Meters (m)/Bundle Pieces/Bundle Weight/Bundle (Kg) Trailer Capacity 20ft - Lm Trailer Capacity 40ft - Lm Mix
BullNose / HalfBattered / Flush 300 150 305 33.21 10.8 36 1,196 108 259.2 Wet
500 100 300 35.5 18 36 1,278 180 432 Wet
600 100 200 Semi Dry
600 150 300 65.8 10.8 18 1,184 108 259.2 Wet
600 200 300 84.4 7.2 12 1,013 86.4 172.8 Wet
600 150 350 70.6 10.8 18 1,271 108 259.2 Wet
600 200 350 99.8 7.2 12 1,198 86.4 172.8 Wet
600 150 380 81.08 7.2 12 973 86.4 172.8 Wet
600 200 380 108.44 4.8 8 868 57.6 124.8 Wet
600 150 400 85.4 10.8 18 1,537 108 259.2 Wet
600 200 400 116 7.2 12 1,392 72 172.8 Wet
600 150 420 89.72 7.2 12 1,077 72 172.8 Wet
600 200 420 119.96 4.8 8 960 57.6 124.8 Wet
600 150 440 94.4 7.2 12 1,133 72 172.8 Wet
660 200 440 125.72 4.8 8 1,006 57.6 115.2 Wet
915 100 150 31.94 21.96 24 767 263.5 571 Wet
915 150 150 48.78 21.96 24 1,171 219.6 527 Wet
915 150 200 65.43 21.96 24 1,570 219.6 527 Wet
915 150 210 70.17 21.96 24 1,684 219.6 527 Wet
915 150 225 73.21 16.47 18 1,318 164.7 395.3 Wet
915 100 255 56.12 21.96 24 1,347 219.6 527 Wet
915 125 255 70.5 19.21 21 1,480 192.1 461 Wet
915 150 255 78.14 16.47 18 1,407 164.7 395.3 Wet
915 100 305 67.5 14.64 16 1,080 146.4 351.4 Wet
915 125 305 82.72 12.81 14 1,158 128.1 307.4 Wet
915 150 305 100.5 10.98 12 1,206 109.8 263.5 Wet
915 200 305 Wet
Pin Kerb 915 50 150 15.95 82.35 90 1,436 923.5 1,976.40 Wet
Heel Kerb 600 75 150 15.5 52.8 88 1,364 739.2 1,372.80 Semi Dry
600 100 200 Semi Dry
Trief Kerb/Tire Friendly 600 390 320 Wet
600 400 380 137 3.6 6 822 28.8 50.4 Wet
600 410 380 140.5 3.6 6 843 28.8 50.4 Wet
600 400 390 138.2 3.6 6 829 28.8 50.4 Wet
Transition kerbs 1205 150 300/200 112.5 7.23 6 675 57.84 101.22 Wet
600 150 300/200 56.5 7.2 12 678 57.6 100.8 Wet
500 150 300/200 48.6 6.0 12 583.2 48 84 Wet
Spill kerbs 600 150 300 Wet
915 300 300 Wet
Roll over kerbs 600 400 200 85.5 7.2 12 1026 93.6 172.8 Wet
600 400 150 Wet